J-16461-4 in Leveling Mounts
Lord Machinery Mounts are designed to support heavy equipment and isolate intermittent or continuous vibration.
The result is greater machine accuracy, longer service life, smoother operation and reduced maintenance.
These mounts are available in four types to suit different needs.
The result is greater machine accuracy, longer service life, smoother operation and reduced maintenance.
These mounts are available in four types to suit different needs.
Leveling Mounts provide the ability to level equipment and machinery.
These mounts offer a vertical natural frequency under maximum load of 12 Hz. They are constructed of a neoprene elastomer, which resists oil, ozone and caustic materials, and a high-visibility yellow housing made of high strength steel.
Maximum adjustment is 1/2" (12.7mm).
Do not exceed this amount.
Metal housing made of high strength steel - high visibility yellow paint (OSHA approved).
- High-efficiency, multi-directional isolation of low frequency vibration.
- Extremely rugged and require no maintenance.
- Easily installed.
- Long service life.
Specifications
- D (in) 4 3/4
- H (in) 1 1/2
- H (mm) 38.1
- Height (in) 1 1/2
- Material Stainless Steel
- Weight (lbs/ft) 1.1
- Weight (kg) 2.5
- Max Axial Load Rating (lbs) 1000
- Max Axial Load Rating (N) 4448
- Adjusting Bolt (mm) 127
- Product Type Mounts
- Manufacturer Lord Corporation
- Frequency 12
- Bolt Diameter 1/2
- Bolt Thread Size 13UNC x 5"
-
Installation
- Before installing, be sure the mounts are the right ones for your machine.
- Remove adjusting bolt and lock nut from mount.
- Raise machine and slide mount under foot.
- Insert adjusting bolt through clearance hole in foot and engage threads in mount.
- Lower machine onto mounts.
- Turn bolt until it bottoms.
To Level : - Level machine by turning the adjusting bolt.
- Tighten lock nut against machine base.
Important :- Maximum adjustment is 1/2 in (12.7 mm). Do not exceed this amount. If additional height is required, use blocks or shims.