- High-efficiency, multi-directional isolation of low frequency vibration.
- Extremely rugged and require no maintenance.
- Easily installed.
- Long service life.
J-16461-4 Leveling Mounts
Item #:
J-16461-4
/
Manufacturer:
Lord Corporation
Lord Machinery Mounts are designed to support heavy equipment and isolate intermittent or continuous vibration. The result is greater machine accuracy, longer service life, smoother operation and reduced maintenance. These mounts are available in four types to suit different needs.Leveling Mounts provide the ability to level equipment and machinery. These mounts offer a vertical natural…
Need a custom part similar to J-16461-4? Simply click to ‘Add to Quote Cart’ below and share your project information in the quote checkout. You can also give us a call at 888-842-5668.
Highlights
Spec Table
| Adjusting Bolt (Imperial) | 127 |
| Bolt Diameter | 1/2 |
| Bolt Thread Size | 13UNC x 5" |
| D (Imperial) | 4 3/4 |
| Frequency | 12 |
| H (Imperial) | 1 1/2 |
| H (Metric) | 38.1 |
| Height (Imperial) | 1 1/2 |
| Installation | <img src="/asset/a0001293.jpg"><ul>Before installing, be sure the mounts are the right ones for your machine. <ol type "1"><li>Remove adjusting bolt and lock nut from mount. <li>Raise machine and slide mount under foot. <li>Insert adjusting bolt through clearance hole in foot and engage threads in mount. <li>Lower machine onto mounts. <li>Turn bolt until it bottoms. <br>To Level : <li>Level machine by turning the adjusting bolt. <li>Tighten lock nut against machine base. <br>Important :- Maximum adjustment is 1/2 in (12.7 mm). Do not exceed this amount. If additional height is required, use blocks or shims. |
| Manufacturer | Lord Corporation |
| Material | Stainless Steel |
| Max Axial Load Rating (Imperial) | 1000 |
| Max Axial Load Rating (Metric) | 4448 |
| Weight (Imperial) | 1.1 |
| Weight (Metric) | 2.5 |
