- Vibration isolation in all directions.
- Noise attenuation.
- Easy installation because of one-piece design.
- Low-cost installation.
- Long service life.
- Consistent performance because of permanently bonded design.
- Shock protection in all directions provided by cushioned snubbing, no metal-to-metal bottoming.
- Standard sizes available from stock.
- Space-saving size.
- Captive installation after overload failure when recommended bolt, washer and nut are used.
- Accommodate English and Metric bolts.
CB-1124-13 Center Bonded Mounts Cb 1100 Series
Item #:
CB-1124-13
/
Manufacturer:
Lord Corporation
Center Bonded Mounts isolate vibration, control shock and reduce noise due to structure borne vibrations. Available in a full range of rated load capacities and able to withstand shock loads of 10 g’s, these mounts effectively protect equipment and improve operator comfort. They are ideal for automotive, marine, railroad and industrial markets.Center Bonded Mounts provide…
Need a custom part similar to CB-1124-13? Simply click to ‘Add to Quote Cart’ below and share your project information in the quote checkout. You can also give us a call at 888-842-5668.
Highlights
Spec Table
| A (Imperial) | 2.98 |
| Application Engineering Assistance | <ul>Frequently, vibration isolation problems require a system engineering analysis. Lord has the computer capability, as well as specialized programs, for analyzing engine/ transmission combinations. The output from this analysis is a mounting proposal which optimizes performance over the complete range of operating speeds. This service is available to you upon request.</ul> |
| B (Imperial) | 0.648 |
| C (Imperial) | 1.98 |
| D (Imperial) | 2 |
| E (Imperial) | 1.82 |
| F (Imperial) | 0.81 |
| ID (Imperial) | 0.64 |
| ID (Metric) | 16.3 |
| Manufacturer | Lord Corporation |
| Max Axial Deflection (Imperial) | 0.085 |
| Max Axial Deflection (Metric) | 2.16 |
| Max Axial Static Load at Deflection (Metric) | 5560 |
| Max Axial Static Load Rating (Imperial) | 1250 |
| Max Axial Static Load Rating (Metric) | 5560 |
| Min Diameter ID (Imperial) | 3.5 |
| Min Diameter ID (Metric) | 88.9 |
| Min Diameter KD (Imperial) | 2.5 |
| Min Diameter KD (Metric) | 63.5 |
| Nominal Dynamic Static Spring Rate Ratio | 1.23 |
| OD (E) (Metric) | 63.5 |
| OD (Imperial) | 2.5 |
| OD (Metric) | 63.5 |
| R (Imperial) | 0.06 |
| R (Metric) | 1.5 |
| Recommended Bolt Grade or Class (SAE J1199) | 10.9 |
| Recommended Bolt Grade or Class (SAE J429) | 8 |
| Recommended Bolt Size (Imperial) | 5/8 |
| Recommended Steel Washer | (Head Washer J-2049-70)|(Tail Washer J-2049-67) |
| SD (Imperial) | 1.81 |
| SD (Metric) | 46 |
| Series | CB-1100 |
| T (Imperial) | 0.75 |
| T (Metric) | 19.1 |
| Thickness (Imperial) | 0.125 |
| Thickness (Metric) | 3.2 |
